Submarine Manufacturing & Products Limited

Subsalve Enclosed Flotation Commercial Lift Bags are very adaptive to a broad range of flotation needs where objects are to be floated close to the surface. EFB(Enclosed Flotation Bags) totally - enclosed “pillow” shape allows the bag to be used in any position upright or flat, outside or inside of structures. There are a multitude of rigging combinations. Perfect for vessel salvage, automobile recovery and emergency rotation systems for ships, aircraft, submersibles and Remotely Operated Vehicles.

Subsalve Enclosed Flotation Commercial Lift Bag's design incorporates a heavy nylon lift harness built into the body of the lift bag, and has a safe working ratio of 6:1. All Subsalve Enclosed Flotation Commercial Lift Bags can be used with a single pick point with the shackle supplied on the bottom of the bag. The Subsalve Enclosed Flotation Commercial Lift Bags can also be inverted to use the two stainless steel rings on the top of the bag with two pick points.

Subsalve Enclosed Flotation Lift Bags are equipped with all necessary hardware and are ready for immediate use.

Note:  All Subsalve Lift bags meet IMCA (International Marine Contractor's Association) standards.  Certification can be provided upon request.

• High strength - Very resistant to abrasion, UV resistant, and not affected by petro-chemicals
• Bag leaves manufacturing facility equipped with all necessary hardware and is ready for immediate use
• Tested prior to shipping and meets rigorous U.S. Department of Defense requirements
• Brass quick disconnect for inflation
• Equipped with pressure relief valves - set to release at 2.5 PSI above ambient pressure