• Capacity - No. 736 Skil Carbride-Tip Bits
• Weight - 20.4Kg
• length - 57cm
• Width - 35cm
• Pressure - 105-140 Bar
• Flow Range - 26-34 Ipm
• Optimum Flow - 30 Ipm
• Porting - 8 SAE O-Ring
• Hose Whips - Yes
• Connector Type and Size - 3/8" Male Pipe hose End
• Motor - Integral

Stanley Hydraulic Tool's HD45 Hammer Drill is a heavy duty model designed for use in medium to heavy applications. It's the ideal tool for drilling holes and for setting anchor bolts.

It drills holes from 19mm to 50mm in diameter and up to 73.7cm deep as well as core drilling up to 102mm in diameter.

The HD45 uses standard Skil 736 type carbide tipped, flute drill bits and requires no fluid to clear holes during operation.

Feathering On/Off Valve/Adjustable Bit Rotation Speed (forward and reverse) make the HD45 easy to start and easy to control.