This compressor is a tried and trusted design that combines the MCH 13-16 pumping unit with a welded tubular frame that is protected with epoxy resin paint. The entire rotating transmission runs on ball and roller bearings. Wear to the moving parts is controlled by oil spray lubrication. The final stage of compression uses a special anodised aluminium piston with five compression rings. This is a rugged design that will give years of trouble free service.

• Filling time - 12 mins
• Litres per min - 260
• m3 per hour - 16
• Engine - Three-phase electric motor
• Engine power - 7.5HP
• Automatic devices and accessories - Condensate discharger with timer, stop at set pressure, timer overload protection, remote control switch, stop/start switches.
• Operating pressure - 225 or 330 Bar - 3200 or 4700 Psi
• RPM - 1.550
• Cylinder diameter - 95-38-14mm
• No. of stages - 3
• Lubrication with oil capacity- Splash lubrication 1.6 litres
• Noise level - 78dB
• Dimensions - 78.5 x 85 x 55cm
• Weight - 167Kg
• Air quality - DIN 188-CGA/E-UNI EN 132

View MCH 13-16/ET Exploded Diagram

View MCH 13-16/ET Parts & Spares