This panel is a 2 Diver HP/LP control panel suitable for offshore use. The panel complies with HSE guidelines. The panel is mounted in a watertight Pelican Case. There are 6 air supply inlets, 2 off LP and 4 off HP. There is also a crossover valve in order to allow air to pass from Diver 1 to Diver 2 if required and vice versa. The depth gauges are 100 mm dia with a ange 0-70 metres (0-230 feet). The panel pressure gauges are 62 mm dia. The pressure gauges are oil filled or oxygen clean dependent on the customer requirements. All the inlets and outlets are 3/8 & 1/4 B.S.P.P. All LP valves are quarter turn ball valves and the HP valves are 1/4 inch needle valves. The LP air supply has a max inlet working pressure of 15 bar (220 psi) and the HP air supply has a max inlet working pressure of 204 bar (3000 psi).

The basic outside dimensions are 460 mm H x 800 mm W x 290 mm D.

The panel is supplied fully certified, calibrated and complete with supporting documentation.

Standard Connections are as follows:
Inlets:

• HP 1/4" BSPP Female
• LP 3/8" BSPP Female

• Divers Supply 3/8" BSPP Female
• Divers Pneumo 1/4" BSPP Female