The EXO Full Face Mask was designed for both surface supplied and scuba diving. By enclosing the divers eyes, nose and mouth, the EXO permits nearly normal speech when used in conjunction with most wireless, and all hardwire underwater communication systems. Its light weight design allows divers to work long dives with no jaw or neck fatigue. The EXO-26 Original Model has automatic defogging of the wide, tempered glass face port. All models have a modular communications design that permits rapid and simple maintenance. An option head protector gives added protection in dangerous diving environments. The ear equalization device is a nose block which is adjustable to several different heights, fitting a wide variety of noses and faces. The oral nasal in the standard and balanced models help keep the CO2 levels to a minimum and improves breathing and communications.

There are three models of EXO Full Face Mask.

The Original EXO-26 is our original design with automatic deffoging, no oral nasal or nose block (optional kit available)

The Standard EXO-26 design now incorpoates an nasal mask and the nose block/equialiser. These design upgrades provide the diver with clearer communications and easier equalisation. There is also a retro fit kit (325-090) for converting original style EXOs to the new oral nasal design.

The CE approved Balanced Regulator EXO-BR was developed to meet strict new european CE requirements. It meets and surpasses EN 250 requirements for regulator performance. The EXO-BR frame is the same DSI yellow as the standard Superlite Helmets and KMB 18 Bandmasks.

The EXO-BR balanced regulator helps to reduce the work of breathing for the diver. The regulator balances the internal air pressure against the valve sealing pressure inside the regulator. This enables the regulator to instantly adjust to changes in line pressure. The balanced regulators provides improved breathing an is adjustable for a wide range of intermediate pressure between 100 psi - 230 psi.

SPECIFICATIONS

EXO SKELETON FRAME A strong injection molded plastic external frame which gives the head harness an even pull completly around the mask seal. The EXO skeleton does not touch the divers face. It is suspended just slightly of the face to hold the communication and breathing equipment in place without discomfort.

HEAD HARNESS A pull through fixed buckle type with an aitomatic locking feature. Quick release buckles are featured on each rugged, double wide strap.

SWIVEL, AIR IN Uses standard scuba threads for incoming breathing air. A regular hose is supplied with each EXO Mask, the swivel comes on all original and standard EXO masks.

COMMUNICATION MODULE The entire module unscrews and is removed from the inside of the mask. Inside the module is a junction box for mating all the wiring for communications. All models of the EXO Mask are available with several different communications configurations. First is the basic mask with no communications. The modular design allows communications to be easily retrofitted. Configurations differ with the type of communications systems installed. When using an umbilical, the bare wire communications post module serves as the hardwire attachment point for a simple two wire communications system. The four pin male waterproof (W.P) Connector option ("marsh marine" type) allows for four wire/round robin communications when diver to diver communication is desired. Both configurations include earphones and microphone. Wireless systems are available through several different manufactures.

FACEPLATE LENS Tempered glass for strength and minimum fogging. A strong plastic frame surrounds the glass to seal on the rubber mask seal.

MASK SEAL, RUBBER Consists of the full rubber body of the mask. It is a soft neoprene that seals comfortably to the divers face. The EXO skeleton is used to hold this soft rubber seal in place on the diver's face for a solid seal.

REGULATOR ADJUSTMENT KNOB Provides demand regulator adjustment for a wide range of incoming air pressure. In addition, it can serve as a steady flow valve. (While using surface supplied air when conservation is not a factor, some divers prefere a slight steady flow.)

PART NUMBER DESCRIPTION 300-026 EXO-26 Original, no comms 300-027 EXO-26 Original w/posts 300-028 EXO-26 Original w/W.P Conn 300-040 EXO-26 Standard, no comms 300-041 EXO-26 Standard w/posts 300-042 EXO-26 Standard, w/posts 300-036 EXO-BR Balanced Reg./ no comms 300-037 EXO-BR Balanced Reg./post 300-038 EXO-BR Balanced Reg./W.P Conn Comm Accessories For Standard & BR 315-210 Comm Assembly w/posts 315-211 Comm Assembly w/4 pin male W.P. Conn Accessories Original EXO-26 315-201 EXO Comm assembly w/posts 315-206 EXO Comm assembly w/4 pin male W>P. 325-635 EXO-26 Nose Block Kit 325-090 EXO-26 Oral Nasal Conversion All Models 300-145 DSI manifold block, standard scuba fitting 300-150 DSI manifold block 02 300-155 DSI manifold block #6 JIC 325-630 EXO-26 tool kit w/pouch 325-650 EXO deluxe tool kit w/pouch 325-025 EXO face cushion Kit 300-010 EXO head protector Standard and Original EXO-26 325-305 Regulator rebuild kit 325-307 Mask spares kit