Back
|
PG-5000 Digital Pressure Gauge |
- Self-powered by standard 9 V battery
- Large, full 4 digit display with 0.5 in. characters
- Microprocessor-based circuit has #TARE# capability standard
|
 |
|
Operational Description
Battery powered digital gauge offers full 4 digit display
The PG-5000 digital gauge packs most of the features of our PG-10000 into a smaller and more economical size. The four-digit LCD display unit incorporates an all-stainless steel sensor that is vibration and shock resistant. Unlike mechanical gauges, it is immune to the effects of pulsating
pressures.
Applications
No special tools or adaptors are required for installation of the PG-5000. This makes the unit an easy, cost effective replacement for less accurate, standard mechanical gauges. The unit#s long life, ease of operation, high accuracy, and low cost make it perfect for all applications where standard 2.5 in. or larger mechanicalgauges have been used.
|
|
| Specification |
| Ranges vacuum to 10,000 psi |
| Direct reading to 10,000 psi (9,999) |
| On/off switch with auto-off circuit |
| ±0.25% of full-scale accuracy |
|
| Specifications |
|
| PERFORMANCE |
| Standard Pressure Ranges: |
| Vacuum to 10,000 psi gage |
| Overpressure: 2x full scale |
| Burst Pressure: 10x full scale or 20,000 psi |
| (whichever is less) |
| Accuracy (linearity, hysteresis, |
| and repeatability): ±0.25% of full scale (B.F.S.L.) |
| ±1 digital count |
| Thermal Zero Shift: ±0.02% F.S./ °F |
| Thermal Sensitivity Shift: ±0.02% F.S./ °F |
| Life: 10 million cycles minimum |
|
| ENVIRONMENTAL |
|
| Compensated Temperature: 30 to 130°F |
| Storage Temperature -40 to 160°F |
| Operating Temperature: 0 to 160°F |
|
| ELECTRICAL |
| Batteries: Standard 9 V (1), user replaceable |
| (2-year life) |
| Display Type: 4 digit LCD, 0.5 in. digits |
| Resolution: |
| Transducer: Infinite; Display: 1 part in 10,000 |
| Low Battery Detection: Displays |
| Adjustments Front Accessible: |
| #Z# Zero Adjust; #S# Span Adjust |
| Auto-Off: 16 minutes |
|
| PHYSICAL |
| Construction Materials |
| Case: Injection Molded Case Material |
| EMI-X # PDX-W-88341 |
| Wetted Materials: 15-5SS |
| Cavity Volume: 0.07 3 in. |
|
| Specification may change without notice |
|
| Ordering Information |
| DGAU.S0057 |
|
|
Back
|
|
Back to Sub-categories
|
|
Back to Main categories
|
|
Company Profile