Back
|
PG-2000 Digital Pressure Gauge |
- Large 3 1/2 digit display with 0.5 in. digits
- Battery operated with convenient on/off switch
- Ranges vacuum to 2,000 psi
- Direct reading to 2,000 psi (1,999)
|
 |
|
Battery Powered Digital Gauge Offers High Accuracy at Low Cost
The latest in solid state design, the PG-2000 incorporates a semi-conductor strain gage pressure transducer as the sensing element, conditioned by state of the art surface mount electronics. The unit requires very low power consumption, resulting in a battery life of 2 years in typical use. The large
3 1/2 digit display and ±0.25% full scale accuracy allows it to replace much larger mechanical gauges.
Applications
No special tools or adaptors are required for installation of the PG-2000. This makes the unit an easy, cost-effective replacement for less accurate, standard mechanical gauges. The unit#T#HOûs long life, ease of operation, high accuracy, and low cost make it perfect for all applications where standard 2 1/2 in. or larger mechanical gauges have been used.
|
|
| Specification |
| 20 minute auto-off |
| ±0.25% accuracy |
| Rugged, chemical-resistant case |
|
| Specifications |
|
| PERFORMANCE |
| Standard Pressure Ranges: |
| Vacuum to 2,000 psi gage |
| Overpressure: 2x full scale |
| Burst Pressure: 10x full scale or 20,000 psi |
| (whichever is less) |
| Accuracy (linearity, hysteresis, & repeatability): |
| ±0.25% of full scale (B.F.S.L.) ±1 digital count |
| Thermal Zero Shift: ±0.02% F.S./°F |
| Thermal Sensitivity Shift: ±0.02% F.S./°F |
| Life: 10 million cycles minimum |
|
| ENVIRONMENTAL |
| Compensated Temperature: 30 to 130°F |
|
| Storage Temperature: -40 to 160°F |
| Operating Temperature: 0 to 160°F |
|
| ELECTRICAL |
| Batteries: Standard 9 V (1), user replaceable |
| 2-year life |
| Display Type: 3.5 digit LCD, 0.5 in. digits |
| Resolution: |
| Transducer: Infinite; Display: 1 part in 1999 |
| Low Battery Detection: Displays #LOBAT# |
| Adjustments: Front Accessible |
| #Z#: Zero Adjust; #S#: Span Adjust |
| Auto Off: 20 minutes |
|
| PHYSICAL |
| Construction Materials: |
| Case: Injection Molded Case Material |
| EMI-X # PDX-W-88341 |
| Wetted Materials: 15-5SS |
| Cavity Volume: 0.07 3 in. |
|
| Specification may change without notice |
|
| Ordering Information |
| DGAU.S0059 |
|
|
Back
|
|
Back to Sub-categories
|
|
Back to Main categories
|
|
Company Profile